The MT2013 Calibrator was originally designed for inhouse test and calibration of our comprehen-sive range of Digital Optical Tachometers, Optical Speed sensing products and Stroboscopes.
The MT2013 is suitable for Calibration of virtually any make of Optical Tachometer, Optical Speed Sensors and Stroboscopes, in addition, they can be used with Digital Panel Tachometers, Ratemeters, Batch counters and similar pulse related products.
The Calibrator can be used to test Panel and Bench type Tachometers via the pulse output feature and also tests proximity and optical speed Sensors.
MT2013 shown with Strobe output & Test leads
|Digital Display||5 Digit LED - displays input or output speeds.|
|Speed Range||3 100,000 rpm in 4 ranges|
|4 position Selector switch|
|Fine adjust via multi turn potentiometer|
|Accuracy||+/- 0.01% +/- 1 digit|
|Resolution||Autoranging max. 0.001 rpm|
|Output Facilities||LED attachment for Optical Tachometers TL pulses for Digital Instrumentation |
|Input Facilities||Optical Sensors [supplied] ( can be used for Stroboscope calibration), Proximity Sensors|
3 wire 10-30vdc types, TTL input & magnetic Sensors
|Sensor Supplies||5vdc & 12vdc|
|Controls||Signal in/out switch for Tachometers or Strobes|
|Input/Outputs||Strobe output Via 3.5mm Stereo socket|
|Signal Input||Via 5 pin DIN socket|
|Sensor Power||Via signal input socket|
|Power Input||110/240vac (dc options by request)|
A traceable Calibration certificate is supplied with each product. An optical sensor is supplied for stroboscope calibration