The Shimpo DT-2100 Tachometer with USB Output is an advanced combination contact / non-contact hand-held tachometer. The DT-2100 features data-logging, USB output and a programmable scaling feature to offset RPM according to application variables. It features a backlit LED Display with upper/lower limit icons and a unique X-Y Graphic mode. Additional display modes unique to the DT-2100 is the "Needle Sweep" and Bar Graph" offers the user a choice of how to view the data. The display can also be inverted to optimize the viewing angle.
In non-contact mode the tachometer measures RPM up to 99,999 RPM at distances up to 13 feet or 500 cm. The DT-2100 can also measure contact RPM, surface speed, or length using the supplied screw-on adapter.
Data logging can be set for single point or continuous logging. Single data points as well as statistics (Max, Min, Average) can be stored in the built-in memory and recalled to the display. Often users need to adjust machinery during testing, with the DT-2100 you can mount it on a tripod, select continuous logging and adjust machinery as necessary. After the test, you can easily review the data on the DT-2100's display or download to a computer using the optional PC Software.
The DT-2100 is supplied as a complete kit with 2 cone tip adapters, funnel tip adapter, shaft extension, 6 inch circumference surface speed wheel, reflective tape, 2 AA batteries ... all supplied in a foam-fitted carrying case. An NIST-Traceable Calibration Certification is optionally available.
- Data Logging with Continous, Single Unit or Statistics modes
- View data and statistics on tachometer display or with optional Windows software
- Built-in Memory with USB Data Output
- Powerful laser for non-contact measurement 2 to 13.1 (5 to 400 cm)
- Non-Contact length measuring mode (requires reflective tape or edge of roller)
- Programmable multiplier to convert reading based on wheel diameter, gear ratios, etc...
- On-screen hi-lo limits for pass/fail analysis
- Auto-detection of contact adapter
- Reversible Display
- 1/4-20 Threaded Insert on bottom of housing for fixed-mounting or use on Tripod
|Range||6-99,999 rpm Non-contact|
0.8-25,000 rpm Contact
|Accuracy||0.006% of reading 1 least significant digit|
|Measuring Units||Speed: rpm, m/min, cm/min, inch/min, ft/min, yds/min, rps, m/sec, cm/sec, inch/sec, km/hr, mph|
Distance: cm, m, km, in, ft, yd
|Memory||Continuous Mode: 1000|
Single Mode: 100
Statistics Mode: 100
|Laser Sensing Distance||2 inches up to 13.1 Feet (5 to 400 cm)|
|Display||Graphical Blue Light OLED, reversible|
|Display Update Time||Selectable: 100 ms, 500 ms, 1 sec, 5 sec|
|Power||2 AA 1.5V batteries or USB|
|Battery Life||Approx: 20 hours with brightness set to 20%|
|Temperature Limits||32 - 113F (0 - 45C) Non-Condensing|
|Dimensions||6.1 x 2.2 x 1.4 (155 x 55 x 35 mm)|
|Product Weight||4.14 oz (125 g)|
|Approvals||CE, RoHS, PSC, FDA, IEC/EN 60825-1 : 2007|
|Included Accessories||2 cone adapters, funnel adapter, 3 extension shaft, surface speed wheel (6 circumference), 2 AA batteries, contact adapter and carrying case|
The DT-2100 is supplied as a complete kit with tachometer, 2 cone adapters, funnel adapter, 3.5 extension shaft, surface speed wheel (6 circumference), reflective tape, 2 AA batteries, contact adapter in a foam-fitted carrying case